Laser Safety Regulations in Queensland: A Step by Step Guide

A Practical overview of Licensing, Radiation Safety Officer appointments and workplace health and safety obligations.

Overview

Laser safety in Queensland is governed through both Radiation legislation and WHS legislation. The radiation licensing scheme generally applies to Class 4 lasers used in health and cosmetic settings; in most cases, WHS apply to all workplaces using lasers regardless of the Class or setting that they are used.

This guide is designed to give workplaces in Queensland a basic overview of what they must do to fulfil their laser safety obligations. WorkSafe Queensland and Queensland Health must be used as primary resources. 

Background: LSCA — Laser Regulations Queensland

Summary: 11 practical steps

1. Determine whether radiation licensing applies · All relevant workplaces

2. Identify hazards and assess workplace risks · All relevant workplaces

3. Develop a Radiation Safety and Protection Plan (RSPP) · Regulated apparatus

4. Apply for a Possession Licence · Regulated apparatus

5. Obtain Approval to Acquire the laser · Regulated apparatus

6. Obtain RSO certification and appoint an RSO · Regulated apparatus

7. Confirm operators hold appropriate Use Licences · Regulated apparatus

8. Arrange equipment and premises compliance certification · Regulated apparatus

9. Implement and maintain WHS safety controls · All relevant workplaces

10. Train workers and document competency · All relevant workplaces

11. Inspect, review and maintain compliance · All relevant workplaces

Step 1 - Determine which regulations apply

Under Schedule 9 of the Radiation Safety Regulation 2021, “laser apparatus” means a laser that could reasonably be used for a diagnostic, therapeutic or cosmetic procedure involving irradiation of a person and has an accessible emission limit greater than the limit for Class 3B under AS/NZS IEC 60825.1:2014. This generally includes relevant Class 4 medical and cosmetic lasers.

In practice, it is important to understand each laser’s model, classification, wavelength, output, intended use and the basis for its licensing status. Workplaces may seek advice from Queensland Health if uncertain.

Step 2 — Identify hazards and assess workplace risks

WHS duties apply irrespective of whether an equipment-specific radiation licence is required. Under the WHS Act and Regulation, businesses must manage risks so far as is reasonably practicable. Laser hazards are workplace dependent but may include direct and reflected beams, airborne contaminants, fire, electrical hazards. For more detail on the risk identification process, please refer to  LSCA — Practical Laser Safety Framework

Step 3 — Prepare a Radiation Safety and Protection Plan

A proposed RSPP is required with a Possession Licence application and must be approved before the licence can be granted. It should describe the specific practice, radiation hazards, controls, responsibilities, training, records, monitoring and incident response.

The Radiation Safety Regulation addresses plan content including safe handling and use, access control, PPE, registers, patient protections where relevant, and RSO monitoring intervals (s 26). For official guidance please refer to Queensland Health's page: Develop an RSPP

Step 4 — Apply for a Possession Licence

The individual or corporation with overall ownership and control of regulated laser apparatus generally requires a Possession Licence. Applications are through Queensland Health with the proposed RSPP, supporting information and relevant fees. Please be aware that a possession licence is different to a use licence.

Official guidance: Cosmetic Possession Licence

Step 5 — Obtain Approval to Acquire

A Possession Licensee generally needs a separate Approval to Acquire before obtaining a regulated laser. The application identifies the equipment and supplier and includes the Possession Licence details.

Before purchase, collect the laser’s technical specifications, operating instructions and supporting compliance evidence. Businesses must obtain the relevant approval before acquisition.

Official guidance: Cosmetic laser Approval to Acquire

Step 6 — Obtain RSO certification and appoint an RSO

A regulated radiation practice must have an appointed Radiation Safety Officer (RSO) before it begins. The person generally needs an appropriate RSO Certificate or an exemption.

For certification, Queensland Health requests evidence of competency, relevant qualifications or training, and completion of its RSO legislation training through iLearn. Certification and formal appointment by the Possession Licensee are separate.

The RSO monitors compliance with the approved RSPP, applicable legislation and safety standards, arranges training, reviews controls, and reports areas of non-compliance to the Possession Licensee. The Possession Licensee retains responsibility for the practice, while the business also has ultimate responsibility for its WHS duties.

Official guidance: Become a Radiation Safety Officer

Step 7 — Confirm appropriate Use Licences

Individuals who operate regulated laser apparatus generally need a Use Licence or an exemption. The appropriate application pathway depends on the procedure, theoretical and practical training, qualifications, supervision and competency. It is important to check that each operator holds the correct licence for the procedure, record conditions and expiry dates, and ensure equipment-specific workplace training is completed.

Official guidance: Cosmetic laser Use Licence

Step 8 — Obtain equipment and premises compliance certificates

Regulated apparatus and the premises where it is used must meet the applicable Queensland radiation safety standards. An accredited person assesses compliance and may issue Certificates of Compliance. The two standards applicable to laser apparatus are as follows:

Equipment standard: Standard for non-ionising radiation apparatus—medical or cosmetic procedures, or related practices (2021).

Premises standard: Standard for premises—non-ionising radiation apparatus (2021).

These standards address the laser equipment and the room or area in which it is used, including relevant warning signage, protective arrangements and other requirements. A Certificate of Compliance does not replace the workplace’s WHS risk management obligations.

Official guidance: Radiation safety standards and accredited testing

Step 9 — Implement WHS safety controls

The WHS Regulation require risks to be eliminated so far as reasonably practicable, or minimised using the hierarchy of controls. Depending on the risk, laser safeguards may include enclosed beams, shielding, isolation, access restrictions, interlocks, safe operating procedures and appropriate laser safety eyewear. Many of these overlap with the controls found in a RSPP.

.

Step 10 — Train workers and document competency

Training should match each person’s responsibilities and the risks of the equipment and procedures used. It may cover laser hazards, operating procedures, access control, eyewear, emergency response and the approved RSPP where relevant. For regulated practices, the RSO has specific functions in arranging training.

To help businesses in the process of fulfilling training obligations, Laser Safety Compliance Australia has freely accessible online training for workers covering laser safety and worker obligations under Queensland law. This does not replace the need for in-person training tailored to the specific laser systems and the unique operational processes of each individual workplace.

Step 11 — Maintain and review compliance

Queensland Health states that relevant laser apparatus used for cosmetic, diagnostic or therapeutic procedures requires reassessment every year, while relevant premises generally require reassessment every five years.

Workplaces should continue to review and maintain controls under WHS Regulation.

Official guidance: Queensland Health — Compliance certificates and intervals

Conclusion

For regulated laser apparatus, compliance requires relevant licences, approvals, an appointed RSO, an approved safety plan and certification. WHS duties also apply to relevant laser workplaces outside that licensing scheme. Identify duties, assign responsibilities, implement controls and keep records showing they work; see the LSCA Practical Laser Safety Framework for further guidance.

Further resources

LSCA — Laser Regulations Queensland

LSCA — Practical Laser Safety Framework

Radiation Safety Act 1999 (Qld)

Radiation Safety Regulation 2021 (Qld)

Work Health and Safety Act 2011 (Qld)

Work Health and Safety Regulation 2011 (Qld)

Disclaimer. General educational information only. Does not replace the need for independent legal advice. Requirements depend on the laser, activity and workplace. Consult the current legislation, regulator and suitably qualified professionals before making compliance decisions.

Oliver Ried, B.Vis Sci, M.Optom, Grad Cert OHS, Grad Cert Safety and Quality Health Service Delivery.

Last reviewed: November 2026